|
|
Butterfly parts page
The table below lists parts we normally build/stock and have available. We do stock
virtually all of the necessary stainless steel screws, rivets, machine screws and
nuts, contact us if you are unable to obtain these locally. If you have questons about
something that you need that you do not see here, please contact us.
Items without stock status are usually available, contact us for price.
2020+ notes; the Pandemic affected deliveries at all levels, which means we may suddenly run out of stock on some items and prices may suddenly change. Also note that due to rapidly rising costs, we are no longer able to offer at wholesale prices any sails. Please consult your local sailmaker, or contact us for suggested reliable sources. Again, because of rapidly changing market conditions, we no longer are listing suggested retail pricing.
|
|
Current as of early 2018
| Part # |
Description |
Status |
Retail Price |
| 2 |
vinyl rub rail |
very few left |
|
| 3 |
vinyl trim cap |
excellent stock |
|
| 5 |
bow fitting |
excellent stock |
|
| 8 |
shroud anchor plate NS |
excellent stock |
|
| 14 |
daggerboard snubber kit |
excellent stock |
|
| 15 |
snubber caps (2 needed) |
excellent stock |
|
| 16 |
snubber rubber spacers each |
excellent |
|
| 17 |
snubber blades each |
excellent stock |
|
| 19 |
hand rail |
excellent stock |
|
| 20 |
hand rail spacers |
excellent |
|
| 23 |
bridle with shackles |
good |
|
| 23a |
bridle without shacles |
good |
|
| 24 |
gudgeon plate |
excellent stock |
|
| 27 |
drain plug assembly |
excellent stock |
|
| 42 |
clamcleat, halyard |
poor |
|
| 43 |
oval head sheet metal screw (for #42) 3/4"x1/8" |
excellent |
|
| 44 |
t-cleat |
excellent |
|
| 48 |
stay set |
good |
|
| 49 |
side stay with tang |
good |
|
| 50 |
forestay with hound |
good |
|
| 55 |
boom assembly without goosenck |
good |
|
| 53 |
stay adjuster NS |
good |
|
| 53a |
stay adjuster OS, older boats with "U"
shaped deck fitting, use on side stays only, use #53 above on
forestay; no longer made - replacement requires cutting off captive
pin in old deck fitting. |
|
|
| 60.1 |
clamcleat outhaul |
poor |
|
| 63 |
gooseneck assembly |
good |
|
| 65 |
daggerboard |
good |
|
| 66 |
replacement set daggerboard bumpers |
excellent stock |
|
| 67 |
rudder/tiller assembly w/extension Forespar NS |
fair stock |
|
| 67.1 |
rudder/tiller assembly w/o extension NS |
fair stock |
|
| 68 |
Rudder Head only NS |
fair stock |
|
| 81 |
safety spring |
excellent stock |
|
| 83 |
rudder disk |
good |
|
| 87 |
rudder blade |
excellent stock |
|
| 88 |
rudder springs |
fair stock |
|
| 92 |
tiller NS |
good stock |
|
| 95 |
tiller extension Forespar 24' |
excellent stock |
|
| 99 |
sail white |
good stock new Elliott sail |
|
| 100 |
sail rainbow |
no longer available |
|
| 101 |
sail blue chip |
no longer available |
|
| 102 |
sail fiesta |
no longer available |
|
| 103a |
batten set |
fair stock |
|
| 104 |
batten upper |
fair stock |
|
| 105 |
batten lower |
fair stock |
|
| 107 |
sail numbers |
good stock |
|
| 110 |
mainsheet blocks standard (3 required) |
good stock |
|
| 110.2 |
Carbo mainsheet blocks with swivel, use 2 on
boom only, with #110 on bridle |
fair stock |
|
| 116 |
deck cover |
good stock
|
|
| 119 |
hiking strap gray |
excellent stock |
|
| 120 |
Jim Young Tiller Extension |
fair stock |
|
| 131 |
3:1 vang (blocks, line, shackle, hook, arm) |
fair stock |
|
| 132 |
Vang Arm |
excellent stock |
|
| 137 |
Vang hook |
good |
|
| 150 |
upper gudgeon/vinyl trim cap OS |
very few left |
|
| 153 |
lower gudgeon OS |
excellent stock |
|
| 155 |
rudder/tiller assembly with Forespar tiller
ext OS |
good |
|
| 155.1 |
rudder/tiller assembly w/o extension OS
|
good |
|
| 156 |
Rudder Head Assembly OS |
good |
|
| 167 |
Rudder Disk (alum) |
good |
|
| 168 |
rudder friction disk |
good |
|
| 178 |
tiller OS |
good stock |
|
Notes:
Older Butterflys with serial number 8011 and below (including all older boats with the serial number on the builder plate inside
the cockpit) use the Old Style (OS) rudder system.
There are none of the original drain plugs (black rubber with brass flip tab) left anywhere. A new drain plug assembly (#27) must be
installed on older boats needing drain plugs. Sorry, our supplier does
not sell the new drain plugs alone, they are only available as the complete
assembly; if you need just a plug, you will still have to buy the complete
assembly.
|
